|
Product Details:
Payment & Shipping Terms:
|
| Product Name: | Cosmetic Pharmaceutic Jars Bottles Drying Industrial Glass Bottle Dryer Hot Drying Oven | Temperature Range: | RT + 10 ℃ ~ 200 ℃ |
|---|---|---|---|
| Control Accuracy: | ± 0.5 | Temperature Uniformity: | ± 2 ℃ |
| Power: | 220V / 380V | Partition: | Each Enclosure 2 * 4 |
| Heating Rate: | Heating Rate ≥ 4-6℃/min. Room Temperature To 200℃ Heating Rate ≤ 45 Minutes | Internal Dimensions: | W830×H370×D475×4 Mm |
| External Dimensions: | W2100*H1500*D720 Mm (subject To Actual Product) | ||
| High Light: | Pharmaceutic Jars Bottles Dryer,Pharmaceutic Jars Bottles Hot Drying Oven,380V Pharmaceutic Jars Drying Oven |
||
Cosmetic Pharmaceutic Jars Bottles Drying Industrial Glass Bottle Dryer Hot Drying Oven
Environmental Test Chamber.pdf
Product Description:
It is mainly used for high-temperature testing, drying, baking, and disinfection of non-volatile and non-flammable and explosive samples. It can also be used for general constant temperature test work. It is an essential equipment for laboratories and scientific research units.
This product has the following characteristics:
1.Using the block assembly structure, the surface uses epoxy powder electrostatic spraying technology;
2.Using digital display, digital setting temperature, can reduce visual reading error and operation error;
3.With independent over-temperature protection, over-current protection and other functions.
Control Method:
Balanced temperature control system (BTC) + specially designed fan forced air circulation system, control SSR by P.I.D., so that the heating amount of the system is equal to the amount of heat loss, so it can be used stably for a long time.
Technical Parameter:
At room temperature 25 ℃, no load:
| Temperature Range | room temperature +10℃～+260℃ |
| Temperature Fluctuation | ±0.5℃ |
| Temperature Uniformity | ±1.5%℃ |
| Heating Rate | heating rate ≥ 4-6℃/min. room temperature to 200℃ heating rate ≤ 45 minutes |
| Internal Dimensions | W830×H370×D475×4 mm |
| External Dimensions | W2100*H1500*D720 mm (subject to actual product) |
Product Structure:
| Inner Box Material | Stainless steel plate |
| Outer Box Material | Iron plate paint (Beige color) |
| Cavity Structure | Four-chamber combination, upper two lower two, each cavity independently controls the temperature and time, the control box is located above the machine |
| Control Method | 7-inch touch screen control, four-chamber independent control, independent operation |
|
Thermal Insulation Material |
High-density glass fiber thermal insulation cotton |
| Urgent | 8 high temperature resistant |
|
Intake and Exhaust Air Outlet |
The exhaust air outlet is diameter: Ф100mm, located directly behind the machine |
| Exhaust Port | Integrated exhaust motor duct., independent exhaust system, and then collect exhaust air at the place where the body is lower than the lower oven |
| Wind Circulation Mode | Motor rear, horizontal circulation mode |
| Storage Rack | A layer of storage rack at the bottom of the box |
| Heater | Use Taiwan imported stainless steel finned radiator U-shaped heating tube |
| Box Door | Clear touch button handle. |
| Alarm | The alarm device is unified as:three-color lamp with sound and light |
| Over-Temperature Protection | Over-temperature and working temperature are displayed as digital display. When the circulating fan fails or exceeds the over-temperature set temperature, the device will alarm and automatically disconnect the heating system |
Contact Person: Ms. Fiona Zhong
Tel: +86 135 3248 7540
Fax: 86-0769-3365-7986
