Name:	IEC60529 IPX9K Waterproof Test Chamber Laboratory High Pressure Machine	Nominal Content Volume:	1000L
Inner Box Size:	1000 Mm 1000 Mm 1000 Mm（WHD)	External Dimensions:	1500 Mm1900 Mm1500 Mm（WHD)
Weight:	About 300kg	Temperature Range:	RT+5～80±5℃，
Test Environment Conditions:	Ambient Temperature Is +25℃, Relative Humidity ≤85%, No Specimen In The Test Chamber	Water Pressure:	9K: 8000 To 10000kpa Display (100bar)
Flow:	14～16L/min Can Be Set	Turntable Speed Adjustment:	0～10r/min
High Light:	Waterproof Test Chamber Machine , IEC60529 Test Chamber Machine , Test Chamber 1000L Machine

Product Name
Name Model	IPX9K waterproof test chamber
1.Specimen Description
	This Test Equipment is Suitable for: This tester is used for the inspection of electrical products with IEC (IP Supplementary Code Enhanced Test), and is manufactured according to the specifications in DIN 40050. We also have other models that meet different specifications of different countries for customers to choose from. This set of components is suitable for electronic and electrical, aerospace, military and other research units of external lighting, signal devices and automotive lamps and lanterns shell protection test test. This Test Equipment Prohibits: Test and storage of flammable, explosive and volatile material specimens Testing and storage of corrosive material specimens Testing or storage of biological samples Testing and storage of specimens of strong electromagnetic emission sources
2. Volumes and Dimensions
2.1 Nominal Content Volume	1000L
2.2 Inner Box Size	1000 mm 1000 mm 1000 mm(WHD)
2.3 External Dimensions	1500 mm1900 mm1500 mm(WHD)
2.4 Weight	About 300kg
3.Performance
3.1 Test Environment Conditions	Ambient temperature is +25℃, relative humidity ≤85%, no specimen in the test chamber
3.2 Test Method	9K: water pressure: 8000 ~ 10000kPa, water temperature 80ºC ± 5ºC protection, in 30 degree increments (four high-pressure nozzles: 0, 30, 60 and 90 degrees), in each angle for 30 seconds, a total of 120 seconds (2 minutes).
3.3 Temperature Range	9K:RT+5～80±5℃,
3.4 Nozzle Orifice Diameter	9K: φ1.8mm (shaped nozzle)
3.5 Nozzle	9K: 4 flat beam nozzles, installed at 30 degree intervals in a 90 degree plane, 100mm to 150mm from the center, adjustable.
3.6 Water Pressure	9K: 8000 to 10000kpa display (100bar)
3.7 Flow	14～16L/min can be set
3.8 Turntable Speed Adjustment	0～10r/min
3.9 Meet the Test Criteria	DIN 40050-9-1993 (IEC 529-1989) High pressure/vapour jet flushing tests as defined in electrical equipment for road vehicles DIN EN 60529-2000 Enclosure protection class (international protection class code) ISO 16750-1-2006 Environmental conditions and tests for electrical and electronic equipment for road vehicles (general provisions) DIN 40050-9 Enclosure protection class IP code ISO20653 Road vehicles - Protection classes (IP codes) - Protection of electrical equipment against foreign objects, water and contact IEC60529 Electrical enclosure protection classification class (IP) code VW80106-2008 General test conditions for electrical and electronic components on automobiles QC/T 417.1 (2001) Automotive electrical harness plug connector part 1
4.Structural Features
4.1 Insulation Envelope	Inside Wall Material: stainless steel plate SUS304, mirror Outer Wall Material: stainless steel plate SUS304, brushed Insulation Layer: polyurethane (PU) foam insulation
4.2 Test Chamber Body Standard Configuration	Lead Hole: diameter φ50mm 1, (located at the back of the box) Sample Rotation Table: load capacity:50kg Mobile Casters: 4pcs
4.3 Door	Hinged single door (Plexiglas), 1pc Rain bracket, 1pc Protection duct door, 1 (open when doing 6K test)
4.4 Control Panel	Temperature, flow, time control display
4.5 Machinery Room	The mechanical room contains: High pressure pumps, water tanks, speed control motors, frequency converters, high temperature and high pressure electromagnetic flow meters, water temperature control devices, etc.
4.6 Power Distribution Control Cabinet	Radiator fans Power Distribution Board General power leakage circuit breaker
4.7 Heater	Using stainless steel armored heater Heater control mode: non-contact iso-periodic pulse width adjustment, SSR (solid state relay)
4.8 Water Supply	Circulation, water level control, import and export water valve. (To replace the water regularly)
5.Flow (pressure) and Time Control Systems
5.1 Working Method	High-pressure pump → tee → nozzle and balance pressure outlet → electromagnetic flow meter (pressure gauge, 100 bar) → divided into four ways (each controlled by solenoid valve, solenoid valve by setting time → controlled by controller) → in 30 degrees of angle progression (four high-pressure nozzles: 0, 30, 60 and 90 degrees), in each angle for 30 seconds, a total of 120 seconds (2 minutes), cycle work.
6.Water Temperature Heating System
6.1 Working Method	BT(H)C balance temperature regulation mode. When the water temperature is lower than 80±5℃ after the hot vapor flushing test on the specimen by the nozzle and back to the water tank, the heating system of the water tank is automatically heated (4KW) to maintain the water temperature at 80±5℃ in a short time to ensure the normal cycle operation of the water temperature of the test. Touch screen controller can be set to display the temperature of water.

IEC60529 IPX9K Waterproof Test Chamber Machine Laboratory High Pressure 1000L

ISO6502 No Rotor Rheometer Machine For Testing Rubber

Lab Rubber Testing Machine Twin Screw Rubber Extruding Machine For PVC PC PA

60ML Electrical Heating Torque Rheometer Plus Mixer Torque Range 0-300Nm

IEC60529 IPX9K Waterproof Test Chamber Machine Laboratory High Pressure 1000L

Waterproof Test Chamber Machine

IEC60529 Test Chamber Machine

Test Chamber 1000L Machine

IEC60529 IPX9K Waterproof Test Chamber Laboratory High Pressure Machine

Rubber testing machine,

Rubber processing machinery,

Rubber two roll mill